Puppet Class: neutron
- Defined in:
- manifests/init.pp
Overview
Class: neutron
Installs the neutron package and configures /etc/neutron/neutron.conf
Parameters:
- package_ensure
-
(optional) The state of the package Defaults to ‘present’
- bind_host
-
(optional) The IP/interface to bind to Defaults to $facts
- bind_port
-
(optional) The port to use Defaults to $facts
- core_plugin
-
(optional) Neutron plugin provider Defaults to ml2
- service_plugins
-
(optional) Advanced service modules. Could be an array that can have these elements: router, firewall, vpnaas, metering, qos Defaults to $facts
- auth_strategy
-
(optional) How to authenticate Defaults to ‘keystone’. ‘noauth’ and ‘keystone’ are the only valid options
- base_mac
-
(optional) The MAC address pattern to use. Defaults to $facts
- dhcp_lease_duration
-
(optional) DHCP lease Defaults to $facts
- host
-
(optional) Hostname to be used by the server, agents and services. Defaults to $facts
- dns_domain
-
(optional) Domain to use for building the hostnames Defaults to $facts
- dhcp_agents_per_network
-
(optional) Number of DHCP agents scheduled to host a network. This enables redundant DHCP agents for configured networks. Defaults to $facts
- global_physnet_mtu
-
(optional) The MTU size for the interfaces managed by neutron Defaults to $facts
- dhcp_agent_notification
-
(optional) Allow sending resource operation notification to DHCP agent. Defaults to $facts
- allow_bulk
-
(optional) Enable bulk crud operations Defaults to $facts
- api_extensions_path
-
(optional) Specify additional paths for API extensions that the module in use needs to load. Defaults to $facts
- root_helper
-
(optional) Use “sudo neutron-rootwrap /etc/neutron/rootwrap.conf” to use the real root filter facility. Change to “sudo” to skip the filtering and just run the command directly Defaults to ‘sudo neutron-rootwrap /etc/neutron/rootwrap.conf’.
- root_helper_daemon
-
(optional) Root helper daemon application to use when possible. Defaults to $facts.
- report_interval
-
(optional) Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time. agent_down_time is a config for neutron-server, set by class neutron::server report_interval is a config for neutron agents, set by class neutron Defaults to: $facts
- control_exchange
-
(optional) What RPC queue/exchange to use Defaults to $facts
- executor_thread_pool_size
-
(optional) Size of executor thread pool when executor is threading or eventlet. Defaults to $facts.
- default_transport_url
-
(optional) A URL representing the messaging driver to use and its full configuration. Transport URLs take the form:
transport://user:pass@host1:port[,hostN:portN]/virtual_hostDefaults to $facts
- rpc_response_timeout
-
(optional) Seconds to wait for a response from a call Defaults to $facts
- rabbit_ha_queues
-
(Optional) Use HA queues in RabbitMQ. Defaults to $facts
- rabbit_heartbeat_timeout_threshold
-
(optional) Number of seconds after which the RabbitMQ broker is considered down if the heartbeat keepalive fails. Any value >0 enables heartbeats. Heartbeating helps to ensure the TCP connection to RabbitMQ isn’t silently closed, resulting in missed or lost messages from the queue. (Requires kombu >= 3.0.7 and amqp >= 1.4.0) Defaults to $facts
- rabbit_heartbeat_rate
-
(optional) How often during the rabbit_heartbeat_timeout_threshold period to check the heartbeat on RabbitMQ connection. (i.e. rabbit_heartbeat_rate=2 when rabbit_heartbeat_timeout_threshold=60, the heartbeat will be checked every 30 seconds. Defaults to $facts
- rabbit_heartbeat_in_pthread
-
(Optional) EXPERIMENTAL: Run the health check heartbeat thread through a native python thread. By default if this option isn’t provided the health check heartbeat will inherit the execution model from the parent process. By example if the parent process have monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread. Defaults to $facts
- rabbit_quorum_queue
-
(Optional) Use quorum queues in RabbitMQ. Defaults to $facts
- rabbit_transient_quorum_queue
-
(Optional) Use quorum queues for transients queues in RabbitMQ. Defaults to $facts
- rabbit_quorum_delivery_limit
-
(Optional) Each time a message is rdelivered to a consumer, a counter is incremented. Once the redelivery count exceeds the delivery limit the message gets dropped or dead-lettered. Defaults to $facts
- rabbit_quorum_max_memory_length
-
(Optional) Limit the number of messages in the quorum queue. Defaults to $facts
- rabbit_quorum_max_memory_bytes
-
(Optional) Limit the number of memory bytes used by the quorum queue. Defaults to $facts
- rabbit_use_ssl
-
(optional) Connect over SSL for RabbitMQ Defaults to $facts
- rabbit_transient_queues_ttl
-
(optional) Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues. Defaults to $facts
- amqp_durable_queues
-
(optional) Define queues as “durable” to rabbitmq. Defaults to $facts
- kombu_ssl_ca_certs
-
(optional) SSL certification authority file (valid only if SSL enabled). Defaults to $facts
- kombu_ssl_certfile
-
(optional) SSL cert file (valid only if SSL enabled). Defaults to $facts
- kombu_ssl_keyfile
-
(optional) SSL key file (valid only if SSL enabled). Defaults to $facts
- kombu_ssl_version
-
(optional) SSL version to use (valid only if SSL enabled). Valid values are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some distributions. Defaults to $facts
- kombu_reconnect_delay
-
(optional) The amount of time to wait before attempting to reconnect to MQ provider. This is used in some cases where you may need to wait for the provider to properly promote the master before attempting to reconnect. See review.opendev.org/#/c/76686 Defaults to $facts
- kombu_missing_consumer_retry_timeout
-
(Optional) How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout. (integer value) Defaults to $facts
- kombu_failover_strategy
-
(Optional) Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config. (string value) Defaults to $facts
- kombu_compression
-
(optional) Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions. EXPERIMENTAL. (string value) Defaults to $facts
- amqp_server_request_prefix
-
(Optional) Address prefix used when sending to a specific server Defaults to $facts.
- amqp_broadcast_prefix
-
(Optional) address prefix used when broadcasting to all servers Defaults to $facts.
- amqp_group_request_prefix
-
(Optional) address prefix when sending to any server in group Defaults to $facts.
- amqp_container_name
-
(Optional) Name for the AMQP container Defaults to $facts.
- amqp_idle_timeout
-
(Optional) Timeout for inactive connections Defaults to $facts.
- amqp_trace
-
(Optional) Debug: dump AMQP frames to stdout Defaults to $facts.
- amqp_ssl_ca_file
-
(Optional) CA certificate PEM file to verify server certificate Defaults to $facts.
- amqp_ssl_cert_file
-
(Optional) Identifying certificate PEM file to present to clients Defaults to $facts.
- amqp_ssl_key_file
-
(Optional) Private key PEM file used to sign cert_file certificate Defaults to $facts.
- amqp_ssl_key_password
-
(Optional) Password for decrypting ssl_key_file (if encrypted) Defaults to $facts.
- amqp_sasl_mechanisms
-
(Optional) Space separated list of acceptable SASL mechanisms Defaults to $facts.
- amqp_sasl_config_dir
-
(Optional) Path to directory that contains the SASL configuration Defaults to $facts.
- amqp_sasl_config_name
-
(Optional) Name of configuration file (without .conf suffix) Defaults to $facts.
- amqp_username
-
(Optional) User name for message broker authentication Defaults to $facts.
- amqp_password
-
(Optional) Password for message broker authentication Defaults to $facts.
- use_ssl
-
(optional) Enable SSL on the API server Defaults to $facts
- cert_file
-
(optional) certificate file to use when starting api server securely defaults to $facts
- key_file
-
(optional) Private key file to use when starting API server securely Defaults to $facts
- ca_file
-
(optional) CA certificate file to use to verify connecting clients Defaults to $facts
- state_path
-
(optional) Where to store state files. This directory must be writable by the user executing the agent Defaults to: $facts
- lock_path
-
(optional) Where to store lock files. This directory must be writeable by the user executing the agent Defaults to: ‘$state_path/lock’
- purge_config
-
(optional) Whether to set only the specified config options in the neutron config. Defaults to false.
- notification_driver
-
(optional) Driver or drivers to handle sending notifications. Value can be a string or a list. Defaults to $facts.
- notification_topics
-
(optional) AMQP topic used for OpenStack notifications Defaults to facts
- notification_transport_url
-
(optional) A URL representing the messaging driver to use for notifications and its full configuration. Transport URLs take the form:
transport://user:pass@host1:port[,hostN:portN]/virtual_hostDefaults to $facts.
- max_allowed_address_pair
-
(optional) Maximum number of allowed address pairs per port Defaults to $facts.
- vlan_transparent
-
(optional) Allow plugins that support it to create VLAN transparent networks Defaults to $facts
330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 |
# File 'manifests/init.pp', line 330
class neutron (
$package_ensure = 'present',
$bind_host = $facts['os_service_default'],
$bind_port = $facts['os_service_default'],
$core_plugin = 'ml2',
$service_plugins = $facts['os_service_default'],
$auth_strategy = 'keystone',
$base_mac = $facts['os_service_default'],
$dhcp_lease_duration = $facts['os_service_default'],
$host = $facts['os_service_default'],
$dns_domain = $facts['os_service_default'],
$dhcp_agents_per_network = $facts['os_service_default'],
$global_physnet_mtu = $facts['os_service_default'],
$dhcp_agent_notification = $facts['os_service_default'],
$allow_bulk = $facts['os_service_default'],
$api_extensions_path = $facts['os_service_default'],
$root_helper = 'sudo neutron-rootwrap /etc/neutron/rootwrap.conf',
$root_helper_daemon = $facts['os_service_default'],
$report_interval = $facts['os_service_default'],
$control_exchange = $facts['os_service_default'],
$executor_thread_pool_size = $facts['os_service_default'],
$default_transport_url = $facts['os_service_default'],
$rpc_response_timeout = $facts['os_service_default'],
$rabbit_ha_queues = $facts['os_service_default'],
$rabbit_heartbeat_timeout_threshold = $facts['os_service_default'],
$rabbit_heartbeat_rate = $facts['os_service_default'],
$rabbit_heartbeat_in_pthread = $facts['os_service_default'],
$rabbit_quorum_queue = $facts['os_service_default'],
$rabbit_transient_quorum_queue = $facts['os_service_default'],
$rabbit_quorum_delivery_limit = $facts['os_service_default'],
$rabbit_quorum_max_memory_length = $facts['os_service_default'],
$rabbit_quorum_max_memory_bytes = $facts['os_service_default'],
$rabbit_use_ssl = $facts['os_service_default'],
$rabbit_transient_queues_ttl = $facts['os_service_default'],
$amqp_durable_queues = $facts['os_service_default'],
$kombu_ssl_ca_certs = $facts['os_service_default'],
$kombu_ssl_certfile = $facts['os_service_default'],
$kombu_ssl_keyfile = $facts['os_service_default'],
$kombu_ssl_version = $facts['os_service_default'],
$kombu_reconnect_delay = $facts['os_service_default'],
$kombu_missing_consumer_retry_timeout = $facts['os_service_default'],
$kombu_failover_strategy = $facts['os_service_default'],
$kombu_compression = $facts['os_service_default'],
$amqp_server_request_prefix = $facts['os_service_default'],
$amqp_broadcast_prefix = $facts['os_service_default'],
$amqp_group_request_prefix = $facts['os_service_default'],
$amqp_container_name = $facts['os_service_default'],
$amqp_idle_timeout = $facts['os_service_default'],
$amqp_trace = $facts['os_service_default'],
$amqp_ssl_ca_file = $facts['os_service_default'],
$amqp_ssl_cert_file = $facts['os_service_default'],
$amqp_ssl_key_file = $facts['os_service_default'],
$amqp_ssl_key_password = $facts['os_service_default'],
$amqp_sasl_mechanisms = $facts['os_service_default'],
$amqp_sasl_config_dir = $facts['os_service_default'],
$amqp_sasl_config_name = $facts['os_service_default'],
$amqp_username = $facts['os_service_default'],
$amqp_password = $facts['os_service_default'],
$use_ssl = $facts['os_service_default'],
$cert_file = $facts['os_service_default'],
$key_file = $facts['os_service_default'],
$ca_file = $facts['os_service_default'],
$state_path = $facts['os_service_default'],
$lock_path = '$state_path/lock',
Boolean $purge_config = false,
$notification_driver = $facts['os_service_default'],
$notification_topics = $facts['os_service_default'],
$notification_transport_url = $facts['os_service_default'],
$max_allowed_address_pair = $facts['os_service_default'],
$vlan_transparent = $facts['os_service_default'],
) {
include neutron::deps
include neutron::params
if ! is_service_default($use_ssl) and ($use_ssl) {
if is_service_default($cert_file) {
fail('The cert_file parameter is required when use_ssl is set to true')
}
if is_service_default($key_file) {
fail('The key_file parameter is required when use_ssl is set to true')
}
}
if ! is_service_default($use_ssl) and !($use_ssl) {
if ! is_service_default($ca_file) and ($ca_file) {
fail('The ca_file parameter requires that use_ssl to be set to true')
}
}
package { 'neutron':
ensure => $package_ensure,
name => $::neutron::params::package_name,
tag => ['openstack', 'neutron-package'],
}
resources { 'neutron_config':
purge => $purge_config,
}
neutron_config {
'DEFAULT/bind_host': value => $bind_host;
'DEFAULT/bind_port': value => $bind_port;
'DEFAULT/auth_strategy': value => $auth_strategy;
'DEFAULT/core_plugin': value => $core_plugin;
'DEFAULT/base_mac': value => $base_mac;
'DEFAULT/dhcp_lease_duration': value => $dhcp_lease_duration;
'DEFAULT/host': value => $host;
'DEFAULT/dns_domain': value => $dns_domain;
'DEFAULT/dhcp_agents_per_network': value => $dhcp_agents_per_network;
'DEFAULT/dhcp_agent_notification': value => $dhcp_agent_notification;
'DEFAULT/allow_bulk': value => $allow_bulk;
'DEFAULT/api_extensions_path': value => $api_extensions_path;
'DEFAULT/state_path': value => $state_path;
'DEFAULT/global_physnet_mtu': value => $global_physnet_mtu;
'DEFAULT/max_allowed_address_pair': value => $max_allowed_address_pair;
'DEFAULT/vlan_transparent': value => $vlan_transparent;
'agent/root_helper': value => $root_helper;
'agent/root_helper_daemon': value => $root_helper_daemon;
'agent/report_interval': value => $report_interval;
}
oslo::messaging::default { 'neutron_config':
executor_thread_pool_size => $executor_thread_pool_size,
transport_url => $default_transport_url,
rpc_response_timeout => $rpc_response_timeout,
control_exchange => $control_exchange,
}
oslo::concurrency { 'neutron_config': lock_path => $lock_path }
oslo::messaging::notifications { 'neutron_config':
driver => $notification_driver,
topics => $notification_topics,
transport_url => $notification_transport_url,
}
neutron_config {
'DEFAULT/service_plugins': value => join(any2array($service_plugins), ',')
}
oslo::messaging::rabbit {'neutron_config':
heartbeat_timeout_threshold => $rabbit_heartbeat_timeout_threshold,
heartbeat_rate => $rabbit_heartbeat_rate,
heartbeat_in_pthread => $rabbit_heartbeat_in_pthread,
rabbit_use_ssl => $rabbit_use_ssl,
rabbit_transient_queues_ttl => $rabbit_transient_queues_ttl,
kombu_reconnect_delay => $kombu_reconnect_delay,
kombu_missing_consumer_retry_timeout => $kombu_missing_consumer_retry_timeout,
kombu_failover_strategy => $kombu_failover_strategy,
kombu_compression => $kombu_compression,
kombu_ssl_ca_certs => $kombu_ssl_ca_certs,
kombu_ssl_certfile => $kombu_ssl_certfile,
kombu_ssl_keyfile => $kombu_ssl_keyfile,
amqp_durable_queues => $amqp_durable_queues,
rabbit_ha_queues => $rabbit_ha_queues,
kombu_ssl_version => $kombu_ssl_version,
rabbit_quorum_queue => $rabbit_quorum_queue,
rabbit_transient_quorum_queue => $rabbit_transient_quorum_queue,
rabbit_quorum_delivery_limit => $rabbit_quorum_delivery_limit,
rabbit_quorum_max_memory_length => $rabbit_quorum_max_memory_length,
rabbit_quorum_max_memory_bytes => $rabbit_quorum_max_memory_bytes,
}
oslo::messaging::amqp { 'neutron_config':
server_request_prefix => $amqp_server_request_prefix,
broadcast_prefix => $amqp_broadcast_prefix,
group_request_prefix => $amqp_group_request_prefix,
container_name => $amqp_container_name,
idle_timeout => $amqp_idle_timeout,
trace => $amqp_trace,
ssl_ca_file => $amqp_ssl_ca_file,
ssl_cert_file => $amqp_ssl_cert_file,
ssl_key_file => $amqp_ssl_key_file,
ssl_key_password => $amqp_ssl_key_password,
sasl_mechanisms => $amqp_sasl_mechanisms,
sasl_config_dir => $amqp_sasl_config_dir,
sasl_config_name => $amqp_sasl_config_name,
username => $amqp_username,
password => $amqp_password,
}
# SSL Options
neutron_config {
'DEFAULT/use_ssl': value => $use_ssl;
'ssl/cert_file': value => $cert_file;
'ssl/key_file': value => $key_file;
'ssl/ca_file': value => $ca_file;
}
}
|